Heavy-Duty · 3-Inch OD · One-Person Raise and Lower
The 3" HD Tilt-Up Base — Walk the Heavy One Down.
Built for the whole HD Series, 20 through 41 feet, and any straight 3-inch OD pole. The same idea as our standard Tilt-Up Base, scaled for a heavier antenna: a one-direction pivot that stops dead at vertical, so one person lowers the whole antenna to waist height for maintenance, a whip change, a new section, or ahead of a storm, and raises it back the same way. On an antenna built to grow, this is how every height change happens with both feet on the ground.
Next in Line for Hand Build
Built alongside the HD antennas and shipped in the same window. Order them together and they go out together. $25 off automatically with any HD Series antenna in the cart.
Watch: Two Minutes
One person walks a 24' Greyline down on the standard Tilt-Up Base, retracts the whip, and walks it back up. The HD tilt uses the same pivot, scaled for the heavier pole. Bart, N1BRL, start to finish →
Fits
Every Greyline HD: the 20', 24' and 28' HD (flagpole or vertical), the 32' HD, and the Skyline 33, 37 and 41 HD. Also other antennas, flagpoles or masts with a straight 3.00-inch OD base section. Measure your pole's outside diameter before you order; for the 2-inch Greyline line use the standard Tilt-Up Base, and for early 2.25-inch Greylines the XL Tilt. The HD Series → · Install, lower, raise: the instructions →
| Fits | Every HD Series Greyline (20 to 41 ft); any straight 3.00" OD pole |
| Material | 6061-T6 aluminum, stainless hardware |
| Pivot | One direction; stops at vertical |
| Ships | Next in line for hand build; free to the USA and Canada |
| Home | Designed and built in the Mountain West · KL2A and HQ in Sun Valley, Idaho |
Photo: the standard Tilt-Up Base. HD tilt photos from the bench are coming.
Ham Radio is fun again! Pass it on… 73, Jon KL2A · Greyline Performance · 435-200-4902