HOA Stealth Flagpole Antenna · 160-6M · No Radials · Made in USA
The DXF28 — The Most Length in the Core Line.
The DXF28 works every band, 160 through 6, from a single feedpoint with no radials — with the most length we build without guying, where 40, 80, and 160 reward it most.
Modeled gain: the 28-foot carries the most length in the core line for 40, 80, and 160. In NEC modeling over average ground it sits just below the Skyline 29, which runs ahead of a textbook quarter-wave on full buried radials from 30 through 15 meters. How height pays →
Why a Flagpole Antenna?
Most HOA CC&Rs explicitly permit residential flagpoles. On a DXF, the pole itself is the antenna, so there is nothing added to see — no stubs, no loading coils, no radial wires. From the street, it is a flagpole. A handsome one.
Field Report — DXCC Challenge
"Since I added the Greyline DX Flagpole vertical antenna, I have added over 200 additions to my DXCC Challenge account. So pretty my DX Flagpole Antenna is allowed in my wife's garden."
— Bill · WB8UIN · 28' DX Flagpole
Two Missions, One Antenna
An oceanfront HOA in Satellite Beach, Florida: Military Auxiliary Radio System emergency traffic and DX from the same 28-foot flagpole. Salt air and HOA approval, both handled.
— AG4FC · 28' DX Flagpole
Why No Radials — and Why It Works
A traditional quarter-wave vertical feeds at its base, so every ohm of ground resistance sits in series with the antenna and steals signal before it leaves your yard. The Greyline VDA is a vertical dipole: return current flows through the lower element, not a buried radial field, so the antenna stops depending on your soil. One feedpoint, every band.
Before you install, run a noise audit. A 2-inch pole goes wherever you choose. Walk the property with a battery AM radio tuned off-station, find the quietest spot, and put the pole there.
In the Box
- DXF28 VDA Radiator
- Feedline kit: ladder line, five snap-on ferrites for choking, ladder-line to PL-259 adapter, spacers
- Ground Sleeve Kit, Assembly Manual and Tuning Guide
- USA-made flag kit hardware, HOA Architectural Brief, Property Integrity Letter
- 7-Year Warranty
You supply coax for the run to your shack and a tuner, in the shack or at the antenna. Both are below, and both save you money in the same cart.
Built for Real Weather
Engineered to ASCE 7-10: 35 MPH flag up, 55 MPH flag down. Lower the flag when weather threatens — at this height the tilt-up base earns its keep. The 2-inch 6061-T6 profile is deliberate — wind force scales with projected area, and a slim, engineered section sheds wind better than a fat one fights it. A wind rating without a cited standard is a guess dressed as a spec.
Complete The Station
These come off automatically when they ride in the same cart as the antenna. No codes.
Tilt-Up Base — $25 Off ($50 with the whip)
Lower the whole antenna to waist height alone, in minutes — for maintenance, the whip, or a storm. No ladder, no second person.
View Tilt Base9' DX Whip — $25 Off
Nine more feet on top turns the DXF28 into a Skyline 37 — the most length we sell without guying, with bonus gain up to about +4 dBi on 17 meters.
View WhipCoax Feedline — 10% Off
The antenna is only as good as the line feeding it. Genuine Times Microwave LMR and Andrew Heliax, cut, terminated, weatherproofed.
See The CoaxA Tuner, Shack or Antenna
Both placements work, and almost any decent-size ATU will do. The LDG RT-100 remote is the easy, affordable starter — weatherproof, powered over the coax.
View The RT-100No flag needed? The DXV28 is the same antenna without flagpole hardware, rated 55 MPH year-round.
HOA and XYL, Handled
Every DXF ships with an HOA Architectural Brief and a Property Integrity Letter, ready to print and submit. The board sees a flagpole, because that is what it is. See the approval kit →
Specs and Shipping
| Height | 28 feet |
| Bands | Every band, 160-6M; the most low-band length in the core line |
| Design | VDA — Vertical Dipole Antenna, off-center fed |
| Power | Legal limit — nothing in the antenna to heat. At full legal limit, use a feedpoint choke rated for 5 kW for headroom. |
| Radials | None |
| Material | 2" 6061-T6 aluminum, fiberglass insulators, stainless hardware |
| Wind | 35 / 55 MPH (flag up / down) — ASCE 7-10 |
| Shipping | Within days, free to the USA and Canada; each box with its own tracking |
| Made In | Sun Valley, Idaho, USA |
| Warranty | 7 years. We improve the design whenever we learn a better way; this page is the current reference. |
Before You Order — Answered
When does it ship?
Within days, free to the USA and Canada, in more than one box with its own tracking. Call 435-200-4902 for a specific date.
Do I need a tuner — will my radio's internal tuner work?
You need a wide-range tuner: the VDA presents a different impedance on each band, which is how it covers 160-6M with no traps and no radials, and most built-in tuners only handle about 3:1. In the shack or at the antenna, both work, and almost any decent-size ATU will do. For long digital runs, check your tuner's duty-cycle rating.
What coax should I run, and how long?
Measure radio to feedpoint and add about 15 percent for routing and a service loop. LMR-400 class is the sweet spot at HF; LMR-600 earns its premium past 100 feet, at legal limit, or buried.
How hard is installation?
The 28-foot installs in a few extra steps with a second pair of hands, or alone with the tilt-up base: dig a post hole, assemble the sections, raise it, run coax, connect the tuner. Questions during install? Call 435-200-4902.
What does the 7-year warranty cover?
If it fails under normal operating conditions, we make it right. A customer's antenna fell in a severe ice storm — we sent a replacement immediately.
The DXF28 Ships Free to the USA and Canada.
Scroll up and add it to your cart — or call and talk it through first. We would rather you order the right height than the nearest one.
435-200-4902
Ham Radio is fun again! Pass it on… 73, Jon KL2A · Greyline Performance · Sun Valley, Idaho