HF Vertical Antenna + Remote ATU Bundle · 160–6M · No Radials · Made in USA
The DXV12 Bundle — Complete System. On the Air Fast.
The DXV12 is built for rooftop, hard-surface, and high-wind installations. No flagpole hardware — clean bare vertical. The highest wind rating in the DXV lineup at 155 MPH. Full 160–6M coverage with no radials. Deploys on concrete, asphalt, frozen ground, or rooftop without a ground system. Paired with the LDG RT-100 remote ATU at the antenna base. You supply coax. That’s it.
From the Founder
“I run a 32-foot at home and work Africa and Asia regularly on 10 through 30 meters. Real gain across every one of those bands — from +1 dBi on 30M up to +3.5 dBi on 17M. Go as tall as your lot allows — the multiband improvement is real.”
— Jon KL2A · Founder, Greyline Performance
Band Coverage
160–6M
All HF bands. One antenna. One tuner.
Wind Rating
155 MPH
ASCE 7-10 engineered.
Guarantee
7 Years
Free shipping USA. Sun Valley, Idaho.
What’s in the Box
The Complete System.
Antenna System
- 12’ DXV VDA Radiator
- RF Choke & Precision Feedline Hardware
- Ground Sleeve Kit
- Assembly Manual & Tuning Guide
- 7-Year Performance Guarantee
LDG RT-100 Remote ATU
- 125W, 160–6M — check digital duty cycle rating
- Weatherproof — base-mount rated
- DC powered over coax — no extra cables
- One-button tuning, memory recall
- Works with any transceiver
Field Report — Height-Restricted HOA
A Phoenix-area operator with a 16-foot HOA height restriction runs confirmed SWR on every band from 160 through 6 meters. The VDA doesn't need height to load — it needs a good tuner and the right feedline. Go as tall as your lot allows. Work everything either way.
— KJ7CWQ · Phoenix, AZ · Full install report →
The Physics
Why No Radials — and Why It Works
Traditional quarter-wave verticals feed at the current maximum at the base — pushing maximum I²R loss directly through soil. Every ohm of ground resistance sits in series with your radiation resistance, stealing signal before it leaves your yard.
The Greyline VDA is a vertical dipole. Covers 160–6M from a single feedpoint with no radials. Return current flows through the lower element, not through a buried radial field — significantly reducing ground coupling and removing dependency on soil conductivity. Performance consistent on any surface. 5/8λ on 6 meters.
Physics foundation: Zavrel W7SX · Antenna Physics: An Introduction (ARRL, 2020) · Kraus W8JK · Antennas (McGraw-Hill) · What is a VDA? →
Before You Install — Run a Noise Audit
The VDA’s 2-inch pole footprint is the smallest ground signature of any full-HF-coverage antenna. A traditional radial field extends hundreds of feet at 160 meters — running toward every noise source on the property. The VDA goes where you choose. Grab a battery-powered AM radio, tune off any broadcast station, walk your property, and find the quietest spot. That’s where the pole goes.
Full Installation Guide →Feed System Note
Balanced VDA — the LDG RT-100 is pre-configured for base-mount. See the Tuner & Balun Configuration Guide →
Specs & Shipping
| Spec | Detail |
|---|---|
| Antenna Height | 12 feet |
| Antenna Type | DXV — HF Vertical VDA, OCF |
| Band Coverage | 160–6M (all HF + 6M) |
| ATU | LDG RT-100 — 125W, 160–6M, base-mount, DC over coax |
| Radials Required | None |
| Material | 6061-T6 Aircraft-Grade Aluminum + Fiberglass |
| Wind Rating | 155 MPH — ASCE 7-10 |
| Shipping | Free — USA. International rates at checkout. |
| Made In | Sun Valley, Idaho — USA |
| Guarantee | 7-Year Performance Guarantee |
Construction — 6061-T6 Aircraft Aluminum
Outside: 2" OD, full length — uniform profile top to bottom. Clean. Sleek. Invisible as an antenna. Inside: wall graduates where the physics demands it — 0.125" lower 30% where base bending stress peaks, 0.065" upper 70% where reducing mass at height lowers dynamic wind loads. Zero plastic. All-metal. McMaster-Carr hardware throughout.
At 12 feet, the Greyline VDA presents 2 square feet of wind surface — height × outer diameter. This is the smallest structural footprint of any full-HF-coverage antenna available. A wider-diameter pole at the same height carries proportionally more wind load on every gust, and cycles that load through the base connection every time the wind shifts. More mass at the top of a cantilevered structure does not improve structural performance — it works against it.
Every Greyline wind rating is derived from ASCE 7-10 structural engineering values — actual geometry, actual math, published methodology. A wind rating without a cited standard is a guess dressed as a spec. Ask any competitor which standard they used. If they can't cite one, you have your answer.
The antenna in this bundle ships from our current artisan production run — hand-built, individually fitted and finished, with threaded metal-to-metal section marriages. Same engineering, same guarantee, same performance. The LDG RT-100 ships as matched system. Full engineering reference →
Limited Edition · Artisan Production Run
Hand-built antenna. Production-matched tuner. The complete system, built to last.
Same 6061-T6 aircraft aluminum. Same ASCE 7-10 wind ratings. Same 7-year guarantee. Threaded transition sections machined directly into the metal — self-aligning, no through-bolting, less total weight. Paired with the LDG RT-100 at the feedpoint where the tuner belongs.
Manufacturing expanding. Things coming this year. Watch this space.
Common Questions
Before You Order — Answered.
What’s the current lead time and availability?
We ship from stock — same or next business day when available. Peak season may carry 1–3 week queue. Current lead time always posted on our Order Status page → Call 435-200-4902 for a specific ship date.
How long does shipping take once it leaves Sun Valley?
USA shipping is free. Ground transit runs 2–5 business days from Sun Valley, Idaho. Tracking sent at shipment. International rates calculated at checkout.
What’s included — do I need to source anything separately?
Everything to assemble and mount is in the box. You supply coax. That’s it.
✓ VDA Radiator (your chosen height)
✓ RF Choke & Precision Feedline Hardware
✓ Ground Sleeve Kit — in-ground, tower, roof, deck, dock compatible
✓ LDG RT-100 Remote ATU — 125W, weatherproof, base-mounted
✓ Assembly Manual & Tuning Guide
✓ 7-Year Performance Guarantee
Complete system — antenna and ATU included. You supply coax only.
The bundle includes the LDG RT-100 — what power level does it handle?
The LDG RT-100 mounts at the antenna base, powered over coax — no extra cables. 125W, 160–6M, weatherproof. Like all ATUs, it carries a reduced power rating for 100% duty cycle digital modes — check the spec sheet for your operating style. Running above 125W? Source a higher-power ATU for your needs. The antenna handles any power level and any mode without restriction.
Are there other bundle configurations available?
The standard bundle pairs your antenna with the LDG RT-100 (125W). For higher power requirements, contact us — we can configure bundles with the higher-power ATU or equivalent. Contact us →
How difficult is installation? How long does it take?
Most operators are on the air in under an hour. Dig a post hole, build the antenna sections (15–30 min), drop it in, run coax, connect the ATU. All stainless hardware comes pre-fastened — no loose hardware to lose in the grass.
Assembly documents at Setup & Manuals → Questions during install? Call 435-200-4902.
What does the 7-Year Guarantee cover?
Seven years of performance coverage. If it fails under normal operating conditions, we make it right. No questions asked. A customer’s antenna fell in a severe ice storm — we sent a replacement immediately. Full terms at 7-Year Warranty Policy →
Ham Radio is fun again! Pass it on... 73, The Greyline Performance Team · Sun Valley, Idaho · 435-200-4902