Steve compares his 20' DX Flagpole Antenna to 84' End Fed Zepp

von Greyline Performance 05. April. 2019

Hi Everyone!

It's antenna season! We have asked customers for their review for the November 2018 updated version of the DX Flagpole vertical antenna system and we will be rolling those conversations out in the coming weeks. Here's one to start things off...

Meet Steve. He has been on the air for a while now with his DX Flagpole, he wrote in with the following report:

The 20' flagpole is working well... I've done some A/B antenna testing with my stealth 84' end-fed-long-wire and the DX Flagpole. I've also done some RBN signal strength testing.

I was able to light up several USA and EU skimmers on 40/cw a couple of evenings ago circa 0001Z with the DX Flagpole. The EFLW also lit up skimmers all over the USA but fewer in EU which gives me some idea of the lower angle of radiation produced by the DX Flagpole.

FYI, I'm running a Yaesu FT-1000MP Mark V Field - 100w.

On the DX front, I've worked the XR-zero on a couple of bands, C5DL, and 9G2HO on 40/30/20. I've also worked several 'garden-variety' EU stations on 40 and 20.

I am able to to get back into the weekly CWops sprints and have had success running a few stations on 40 and 20 CW... (running!)

So, yes, I'm pleased with the results thus far given our poor band conditions....

Are you wanting to light RBN skimmers up all over the world just like Steve does with his DX Flagpole no radials Vertical Dipole Antenna from his HOA QTH?

Let's get you and your friends back on the air. Consider sHaring with your friends, they will be so glad to join you in the bands!

Now shipping Antennas worldwide. Want one?

73 Greyline Performance

More RF Blog Stories

I am providing my first impression report regarding my 24FT HOA antenna. Installation was easy once I was able to figure out the instructions. The twin lead spacers were missing so I inserted a section of PVC into the lower section to insulate the twin lead. I’m using an IC7300, MFJ 993brt remote tuner, Balun Design, Inc model 117t balun which takes coax as input and twin lead as output. I then feed it through an Array Solutions model AS309H arrestor which takes twin lead as both input and output. With the remote tuner: SWR readings are 1.2 in the cw portion of 40 meters and 1.5 in the ssb portion SWR readings are 1.1 all the way across 20 meters (my favorite band) SWR readings are 1.2 in the cw portion of 15 meters and 1.4 in the ssb portion I am a cw guy and have worked all over Europe and South America as well as New Zealand and am getting very good signal reports. Needless to say, I am very pleased with this antenna so far. It works way better than I expected I haven’t yet had to operate in windy or rainy conditions so there is more to learn. Howard Glassman K4OBC

Great pole, excellent service and communications.

I purchased the pole without the antenna and am very happy with the quality and ease of installation.

Great addition easy install

Added this to my 20ft flagpole for 160 m work. Able to make contacts, looking forward to up the power. Great flagpole!

DX and the Greyline antenna

What a wonderful Antenna I have made contacts in over 50 country's so far in less than three weeks easy to assemble and works.

24' Flagpole does the job.

I purchase a 20’ Flagpole antenna that also included the 4’ extension. I installed the flagpole the end of January here at my home in central Florida. The install was easy with only a couple of small issues that were easily resolved by just thinking things through. I installed the antenna in the back yard in the HOA and have not had any complaints.

The performance of the antenna has been very good. The SWR on most band has been =< 1.5 except the 12 meter band. The SWR is just under 2.0. The DX into Europe and Africa has been good. Have done a lot of FT4 and FT8 with good reports. SSB has been good with good signal reports depending on propagation. All of my contacts have been made on 70 – 100 watts. I am using a SGC 230 tuner mounted at the base of the antenna

Most of my contacts have been 10 MHz – 28 MHZ. I have done some work on 40 meters but not much. Not much of an night owl so I don’t get very much of a change to use the antenna on 40 – 160 meters. The SWR is on these bands is 1.0 – 1.3, so I would expect good performance if I had more power.

At this point in time the only negative I have to report is the flag. It has been flying on most days in 5 to 15 MPH winds. I have taken it down when we had higher winds had exceed the 15 MHP. I noticed this morning the flag was torn and shredded. I took the flag down and noticed the flag was made by Anley and it was manufactured in China. I wouldn’t expect a flag to be in this condition after 3 months. I had USA made flags last over a year flying in much stronger winds that this one.

I'm only giving a 4 because of the flag issue. I will reach out to Greyline to see what they have to say.

We are so glad to hear that your Antenna has FB SWRs from 160-10M and congrats on the great DX! Fun... We buy our flags from several USA companies one of which is Anley, Inc., which is also a US company based in California. We are happy to replace the flag.

US GOV reports 90-days is the expected Flag lifespan. 'The U.S. Government generally expects a nylon or cotton flag to last 90 days based on being flown daily from sunrise to sunset - but not during periods of inclement weather. Tests have shown that, in some cases, a flag flown 24 hours a day will last only one-fourth as long as one flown only during the daylight hours.' - again, happy to help and we will contact you directly for a replacement.

Remember, Ham Radio is fun again, Please pass it on to your friends and family. - 73m Greyline Performance

Steve compares his 20' DX Flagpole Antenna to 84' End Fed Zepp

More RF Blog Stories

Hinterlassen Sie einen Kommentar

Let customers speak for us